Slice Lite Ranger Battery RetrofitUpdated 13 days ago
The Ranger Batteries (375wh and 490wh) are compatible with the Slice Lite, but you must first unplug a communication wire from the backside of the discharge terminal. Additionally, the Ranger battery will not charge when installed on the bike! Vvolt will supply a complimentary charger with all Ranger batteries purchased for the Slice Lite.
Tools Required
- #2 Philips screw driver
- Finger dexterity
Steps
- Remove the factory battery from the bike.
- Use thescrew driver to remove the upper and lower fixing screws that hold the discharge terminal in the frame.
- Gently pull the discharge terminal from the frame.
- Unplug the two-pin wires circled below:
- Reinstall the discharge terminal.
Friendly reminder: you cannot charge the Ranger Battery installed on the Slice Lite.