Centauri SE Technical SpecificationUpdated 11 hours ago
Centauri SE | |||
|---|---|---|---|
| Component | Specification | Material | Torque Specification |
| Frame Description | Two-size Vvolt custom aluminum stepthrough, removable downtube battery and adjustable dropouts. Rack & fender compatible. Single color paint with reflective graphics | Alloy | n/a |
| Fork | Vvolt custom thru-axle aluminum with fender and accessory mounts | Alloy | n/a |
| Head Set | Sealed bearing | Alloy | n/a |
| Handlebar | 31.8mm clamp, 720mm width, 15mm rise x 12º sweep | Alloy | n/a |
| Stem | Aluminum, 31.8 clamp, 80mm reach | Alloy | Faceplate: 5nm Steerer clamp: 6nm |
| Motor | 120nm torque / 350w (nominal) mid-drive motor by Ananda, custom programmed for Vvolt | Alloy/Steel | Motor bolts: 8nm |
| Handlebar Computer | D16 Full-color display with left-hand remote | Resin | 2nm |
| Throttle | None | Resin | n/a |
| Sensors | Internal Torque, Cadence, Speed and Temperature Sensors | Multiple | n/a |
| E-Power Battery | 36v 13.6ah 490wh, with onboard battery management system, UL2271 Certified | Multiple | n/a |
| E-Power Charger | 36V/2A (UL Listed) | Resin | n/a |
| Crankset | Alloy, 170mm ISIS spline cranks | Alloy | 40nm |
| Belt Drive Sprocket | Gates CDX, 46t | Alloy | 8nm |
| Belt Drive Rear Cog | Gates CDX, 22t | Steel | n/a |
| Drive Belt | Gates CDX, 122t | Carbon | n/a |
| Shifter | Enviolo Pure Twist Shifter w/display | Resin | 2nm |
| Brakes | Tektro 720, 180mm rotors | Alloy | Lever: 4nm Caliper: 8nm Rotor bolts: 6nm |
| Front Hub | Thru-Axle disc, 32h 12x100mm, sealed cartridge bearings | Alloy | Thru-Axle: 8nm |
| Rear Hub | Enviolo Trekking, 380% range, manual shift, 32h 135mm spacing | Alloy | Bolts: 35nm |
| Spokes | 14g front & rear straight gauge | UCP | n/a |
| Nipples | Brass | Brass | n/a |
| Rims | 25mm double wall aluminum | Alloy | n/a |
| Tires | Kenda Kwest 27.5x2.2, Reflective Sidewall with ProTection anti-puncture belt | Rubber | n/a |
| Pedals | Wellgo Alloy platform with reflectors | Aluminum | Snug! |
| Saddle | Hybrid gel comfort saddle | Steel | Snug! |
| Seat Post | 27.2 x 350mm | Alloy | Snug! |
| Seat Clamp | Bolt-On, hidden | Alloy | Snug! |
| Grips | ergonomic locking grips | Kraton Rubber | 3nm |
| Kickstand | Black aluminum 40mm direct-mount | Alloy | 8nm |
| Bell | Mini Bell, double ding | Steel | n/a |
| Lights | Front and rear STVZO-compliant. 60LUX front, 220º vis rear | Alloy/Plastic | n/a |