Vvolt Aluminum Rear Rack Installation TipsUpdated 12 days ago
Installation Pro Tips:
- If you're installing this rack on a bike without the necessary hardware, you'll need four bolts:
- Two for the rear dropout eyelets and two for the seat stay braze-ons.
- If your bike lacks these mounting points, we recommend heading to a local bike shop for assistance.
- Most eyelets and braze-ons are threaded for M5 bolts, and M5x10mm usually work well to attach racks.
- It's easy to strip out the threads on the dropout eyelets and seat stay braze-ons, so make sure your bolts are square to the frame before installing them!
- Leaving the rack stays loose in their adjusters makes attaching them more manageable.
- Please check your hardware after a few rides to ensure it stays tight.
- Stuck? Please email us at [email protected]