Rear Wheel Removal: Centauri SE (2024-present)Updated 5 days ago

Pro Tips for Wheel Removal and Installation:

• The axle nuts should be torqued to 30nm
• Removing and installing the Enviolo cable stops is the trickiest part of this whole endeavor, so take your time! 
  • If the cable stops are not easily removed or installed, loosen the barrel adjusters at the shifter for a bit more slack. Be sure to add cable tension before riding! 
• The axle should be fully seated within both dropout slots. Do not attempt to ride the bike until it is fully seated!
  • Using gravity and placing the bike on the ground to seat the axle is helpful.
• You should not have to adjust belt tension!
  • Sometimes, the axle position changes and affects belt tension.