Alpha II Technical SpecificationUpdated 11 hours ago
Component | Description | Material | Torque |
---|---|---|---|
Frame Description | Vvolt custom aluminum with removable downtube battery and adjustable dropouts. dual-color paint with reflective graphics | Alloy | n/a |
Fork | Vvolt custom tapered thru-axle aluminum with fender mounts and 3-pack mounts | Alloy | n/a |
Head Set | Semi-integrated, sealed, steel races, ZS44/56 | Alloy | n/a |
Handlebar | Alloy, 31.8mm clamp, 720mm width, 15mm rise x 30º sweep | Alloy | n/a |
Stem | Alloy, 40mm extension, 7° rise (S) | Alloy, 90mm extension, 35° rise (M, L) | Alloy | Faceplate: 5nm Steerer Clamp: 6mn |
Motor | 350w (nominal) rear hub motor by Ananda, custom programmed for Vvolt | Alloy/Steel | n/a |
Handlebar Computer | D20 display with left-hand remote | Resin | 2nm |
Throttle | Thumb Throttle, custom programmed for up to 80% motor power on throttle | Resin | 2nm |
Sensors | 36 point Cadence sensor bottom bracket, Speed and Temperature Sensors | Multiple | n/a |
E-Power Battery | 36v 10.4ah 374wh, with onboard battery management system (UL-2771) | Multiple | n/a |
E-Power Charger | 36V2AP, 100-240V Output 36V/2A CC-CV (UL Listed) | Resin | n/a |
Crankset | Alloy, Square Taper 170mm arms | Alloy | 40nm |
Belt Drive Sprocket | Gates Sidetrack, 50t | Alloy | n/a |
Belt Drive Rear Cog | Gates Sidetrack, 22t | Steel | 40nm |
Drive Belt | Gates Sidetrack, 118t | Carbon | 45hz |
Shifter | None | Resin | n/a |
Brakes | Shimano MT-200, 160mm 6-bolt rotors, speed cut switch | Alloy | Clamp: 4nm Caliper: 8nm Rotor bolts: 6nm |
Front Hub | Thru-Axle disc, 32h 15x110 "BOOST" spacing | Alloy | Thru-Axle: 8nm |
Rear Hub | Hub motor, 36h | Alloy | Motor Bolts: 35nm |
Spokes | 13g front & rear straight gauge stainless steel, F:248mm/286mm R: 268mm/270mm | UCP | n/a |
Nipples | Brass | Brass | n/a |
Rims | 23.8mm wide alloy, double wall aluminum (non-tubeless) | Alloy | n/a |
Tires | 27.5" x 2.4", puncture protection belt, reflective sidewall, all-weather tread | Rubber | n/a |
Pedals | Wellgo alloy platform with reflectors | Aluminum | n/a |
Saddle | Hybrid gel comfort saddle | Steel | n/a |
Seat Post | 30.9mm x 350mm (clip-on powered light attached) | Alloy | n/a |
Seat Clamp | Bolt-On | Alloy | Snug! |
Grips | Ergonomic lock-on grips | Kraton Rubber | 2nm |
Kickstand | Rear mounted with adjustable foot | Alloy | 8nm |
Bell | Mini Bell ding ding | Steel | n/a |
Lights | Integrated Front and rear Vvolt "multivision", integrated USB-C output with .5amp charging | Alloy/Plastic | n/a |