Rear Wheel Removal: Alpha IIUpdated a month ago

Pro Tips for Wheel Removal and Installation:

• The axle nuts should be torqued to 30nm
• Please do not twist the motor wires when unplugging or plugging them in. The connection is watertight, so it's very snug. There is a line on the motor side of the connection, which you can use to ensure it's completely connected. Align the white arrows, and don't bend any pins. 
• The axle should be fully seated within both dropout slots. Do not attempt to ride the bike until it is fully seated!
  • Using gravity and placing the bike on the ground to seat the axle is helpful.
• You should not have to adjust belt tension!
  • Sometimes, the axle position changes and affects belt tension. Learn how to adjust your belt tension here!